856-456-0750 Ext. 105
Monday to Thursday
8:30am to 5:00pm
Open until 7:00pm on the fourth Wednesday of every month
The Construction Secretary schedules all inspections. The Building Department processes construction permit applications and enforces compliance with construction sub-code requirements.
Construction Official – Mark Laggy
Building Subcode Inspector – Stephen Beach
Electrical Subcode Inspector – Mark Laggy
Plumbing Subcode Inspector – Fabrizio Flaiano
Fire Subcode Inspector – Dave Munoz
Building – Tuesday and Thursday 8:30am to 10:00am
Electrical – Tuesday and Thursday 9:00am to 11:00am
Plumbing – Thursday Noon to 2pm
Fire – Thursday 11:30am to 1:00pm
Construction work must be inspected in accordance with the State Uniform Construction Code Regulations N.J.A.C. 5:23-2.18. This agency will carry out such periodic inspections during the progress of work as are necessary to ensure that work installed conforms to the approved plans and the requirements of the Uniform Construction Code. The owner or other responsible person in charge of work must notify this agency when work is ready for any required inspections specified below.
Requests for inspections must be made at least 24 hours prior to the time the inspection is desired.
The work must not proceed in a manner which will preclude the inspection until it has been made and approval given.
Required Inspections for all Sub-Codes for One and Two Family Dwellings:
The bottom of footing trenches before placement of footings, except that in the case of pile foundations; inspections shall be made in accordance with the requirements of the building subcode
Foundations and all walls up to grade level prior to backfilling
All structural framing and connections prior to covering with finish of infill material; plumbing underground services, rough piping, water service, sewer, septic services and storm drains; electrical rough wiring, panels and service installations; insulation installations
Installation of all finished materials, sealings of exterior joints; plumbing piping, trim and fixtures, electrical wiring, devices and fixtures; mechanical systems equipment
Required Special Inspections:
The applicant by accepting the permit will be deemed to have consented to these requirements:
A final inspection is required for each applicable sub-code area before a final Certificate of Occupancy or Approval may be issued
Any violations of the approved plans and/or permit will be noted and the holder of the permit notified of discrepancies
A complete copy of approved plans must be kept on the job site